This is my first time buying a leather hole puncher and after seeing sales associates using similar leather hole punchers in stores I figured it wouldn't be any different if I used it myself, and that I could also save some time and money if I didn't have to go to the store or to a cobbler. Before finally settling with this hole puncher I was looking at a few other punchers but felt that Skilled Crafter's leather hole puncher looked more promising than the others. The only downside is that the puncher was a tad pricey and it would be nice if it was cheaper, however, the puncher itself does feel heavy duty and sturdy.
I was really nervous about using a leather puncher for my first time because my goal was to add a hole on the strap of my new Gucci bag. The strap was too long for my petite frame and I needed to add a hole to make the shoulder drop shorter. I practiced on three old belts that I had from a long time ago before trying it on my Gucci strap. The first few punches on my old belts didn't come out as clean and I wondered if it was because the material were faux leather or that the belts were just really dated - they were soft and a bit mushy. After several more punches on the old belts I was eventually able to get clean cuts in different sizes. The punch wheel was hard to turn and I had to use lot of force each time adjusting the spokes. The wheel only goes one direction so you will need to push the wheel in the direction that is going away from you. My fingers were hurting after turning the wheel twice so I had to give them a rest before adjusting the wheel again.
I've included two photos (front and back) of my Gucci bag strap. The strap is about 1/8 inches thick with glazed coating on both sides. The left hole is the original manufacture hole and the right hole is the new hole that I made with the puncher. I reached out to Skills Crafter prior to using puncher and they responded to me very promptly. The customer rep recommended that I put a thin card on the bottom for a clean cut so I followed the advice and the hole came out flawless. In the midst of punching the strap, the clasp for some reason got in between the handles so it prevented me from pressing the puncher all the way down. I freaked out for a split second because I thought I had ruined my bag because the leather strap was probably too hard then I quickly realized that the clasp was unexpectedly positioned horizontally (I was probably too nervous to even realize it at that time) so no matter how hard I squeezed the handles together the puncher would not go all the way down. If the puncher made it all the way through you will hear a faint click sound. Luckily the hole turned out fine even after the
hysterical and embarrassing moment of that 15 seconds of my life. Everything was okay and life goes on.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Frequently bought together
$19.97
Get it as soon as Wednesday, May 15
In Stock
+
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
Product Description
Professional Quality Leather Hole Punch for Precision & Durability
You want a hole punch that you can rely on and won't let you down. Whether it's your favorite leather belt that just doesn't quite fit the way it used to, or your faithful old watch strap that feels annoyingly loose but you don't want to replace it, we've got you covered.
It's the Ideal tool for crafts people and for repetitive use - where you need your punch to keep going over and over again, every day, every week without stress or strain to your hand or wrist.
It's the Complete Kit! - Measure, Mark & Make Your Perfect Round Hole
|
|
|
|
|---|---|---|
1. Measure with ConfidenceThe Pro Hole Punch set includes a handy Clear Ruler to measure the exact position for the new hole. You can quickly mark it with the Awl Tool so there's no guessing. |
2. Select the Right Hole SizeChoose the right hole size then simply rotate the wheel to line up the punch blade above the plate. It includes the most popular hole sizes. |
3. Punch like a Pro!Position the material on the large Punch Plate, with the hole punch located directly over the marked area, and squeeze the handles together to punch a perfect round hole. It's as easy as that! |
Works on Many Different Materials including...
Why Choose The Skilled Crafter Leather Hole Punch?
It will cut neat holes in many types of material including leather, card, felt, fabric, vinyl, paper, canvas, soft plastics and rubber - and with 6 different holes sizes to choose from and a large punch plate for optimal stability it is ideal for most jobs.
The Most Popular Hole Sizes:
- 2 mm or 5/64 inch
- 2.5 mm or 3/32 inch
- 3 mm or 1/8 inch
- 3.5 mm or 9/64 inch
- 4 mm or 5/32 inch
- 4.5 mm or 11/64 inch
It's an essential piece in a Leather Workers tool bag and it's the professional quality hole punch that won't let you down.
We think you will love it!
|
|
|
|
|
|---|---|---|---|
Sprung Lever MechanismThe double lever mechanism means it takes the strain so you don't have to. You don't need to be strong to punch neat holes. Perfect for those with a weaker grip or prone to hand or wrist pain. |
Comfortable HandlesIt has comfort grip handles made from durable and gentle pvc and is ideal for repetitive work. Metal handles can cause blisters and sore pressure points. Our handles are non slip and cushioned to help prevent damage and strain to your hands. |
Strong & DurableYou want a hole punch that will keep on punching precise holes for a very long time. So you will receive spare punch plates with screwdriver in a handy box that stores neatly between the handles. |
Useful AccessoriesIncludes an Awl Tool for marking the position and for removing stubborn off-cuts from inside the tubes. Also includes a handy Ruler to measure your material and eliminate the chance of making a mistake. |
Compare The Benefits
You Get So Much More With The Pro Hole Punch
Skilled Crafter is the brand to trust. We only put our name on quality tools so you know you're in safe hands.
The Pro Hole Punch is made from high grade hardened hollow manganese steel making it highly reliable, with sharp blades that will make the neatest hole so it won't let you down. Beware of imitations!
- Includes the most popular hole sizes.
- You don't need to be strong to punch neat holes.
- Perfect for those with a weaker grip or prone to hand or wrist pain.
- Non-slip cushioned handles for comfort.
- Ideal for repetitive work.
- Includes all the accessories you need.
Just What You Need From a Hole Punch
Designed for punching neat holes in belts, bags, horse tack & saddles, shoes, sandals, pet collars, id & store cards, and for many different craft & DIY projects.
Professional quality with the strength and precision you demand, the Pro Hole Punch is the hole puncher designed to make light work of tough jobs.
We care about the environment
You will receive your Pro Hole Punch in Amazon approved Frustration Free Packaging. There's no extra waste! Please recycle.
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
6:05
Click to play video
Un-boxing the Pro Hole Punch by Skilled Crafter
Skilled Crafter
Videos for this product
0:58
Click to play video
Skilled Crafter Pro Hole Punch Demonstration
Skilled Crafter
Videos for this product
1:26
Click to play video
How to Punch a Hole in a Bag Strap by Skilled Crafter
Skilled Crafter
Reviews with images
Quick and easy
I bought this tool because I needed something more professional having bought an expensive belt and I didn't want to ruin it. With this tool it was really easy, fast and super precise.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on January 8, 2021
Size: 1 PackVerified Purchase
This is my first time buying a leather hole puncher and after seeing sales associates using similar leather hole punchers in stores I figured it wouldn't be any different if I used it myself, and that I could also save some time and money if I didn't have to go to the store or to a cobbler. Before finally settling with this hole puncher I was looking at a few other punchers but felt that Skilled Crafter's leather hole puncher looked more promising than the others. The only downside is that the puncher was a tad pricey and it would be nice if it was cheaper, however, the puncher itself does feel heavy duty and sturdy.
I was really nervous about using a leather puncher for my first time because my goal was to add a hole on the strap of my new Gucci bag. The strap was too long for my petite frame and I needed to add a hole to make the shoulder drop shorter. I practiced on three old belts that I had from a long time ago before trying it on my Gucci strap. The first few punches on my old belts didn't come out as clean and I wondered if it was because the material were faux leather or that the belts were just really dated - they were soft and a bit mushy. After several more punches on the old belts I was eventually able to get clean cuts in different sizes. The punch wheel was hard to turn and I had to use lot of force each time adjusting the spokes. The wheel only goes one direction so you will need to push the wheel in the direction that is going away from you. My fingers were hurting after turning the wheel twice so I had to give them a rest before adjusting the wheel again.
I've included two photos (front and back) of my Gucci bag strap. The strap is about 1/8 inches thick with glazed coating on both sides. The left hole is the original manufacture hole and the right hole is the new hole that I made with the puncher. I reached out to Skills Crafter prior to using puncher and they responded to me very promptly. The customer rep recommended that I put a thin card on the bottom for a clean cut so I followed the advice and the hole came out flawless. In the midst of punching the strap, the clasp for some reason got in between the handles so it prevented me from pressing the puncher all the way down. I freaked out for a split second because I thought I had ruined my bag because the leather strap was probably too hard then I quickly realized that the clasp was unexpectedly positioned horizontally (I was probably too nervous to even realize it at that time) so no matter how hard I squeezed the handles together the puncher would not go all the way down. If the puncher made it all the way through you will hear a faint click sound. Luckily the hole turned out fine even after the
hysterical and embarrassing moment of that 15 seconds of my life. Everything was okay and life goes on.
I was really nervous about using a leather puncher for my first time because my goal was to add a hole on the strap of my new Gucci bag. The strap was too long for my petite frame and I needed to add a hole to make the shoulder drop shorter. I practiced on three old belts that I had from a long time ago before trying it on my Gucci strap. The first few punches on my old belts didn't come out as clean and I wondered if it was because the material were faux leather or that the belts were just really dated - they were soft and a bit mushy. After several more punches on the old belts I was eventually able to get clean cuts in different sizes. The punch wheel was hard to turn and I had to use lot of force each time adjusting the spokes. The wheel only goes one direction so you will need to push the wheel in the direction that is going away from you. My fingers were hurting after turning the wheel twice so I had to give them a rest before adjusting the wheel again.
I've included two photos (front and back) of my Gucci bag strap. The strap is about 1/8 inches thick with glazed coating on both sides. The left hole is the original manufacture hole and the right hole is the new hole that I made with the puncher. I reached out to Skills Crafter prior to using puncher and they responded to me very promptly. The customer rep recommended that I put a thin card on the bottom for a clean cut so I followed the advice and the hole came out flawless. In the midst of punching the strap, the clasp for some reason got in between the handles so it prevented me from pressing the puncher all the way down. I freaked out for a split second because I thought I had ruined my bag because the leather strap was probably too hard then I quickly realized that the clasp was unexpectedly positioned horizontally (I was probably too nervous to even realize it at that time) so no matter how hard I squeezed the handles together the puncher would not go all the way down. If the puncher made it all the way through you will hear a faint click sound. Luckily the hole turned out fine even after the
hysterical and embarrassing moment of that 15 seconds of my life. Everything was okay and life goes on.
Images in this review
Reviewed in the United States on May 24, 2022
Size: 1 PackVerified Purchase
So I’m stubborn…. Reeeeally stubborn. So stubborn that I decided using an ice pick and a book was just as good as an actual leather punch and hammer. That’s right I’m that idiot and I’m here to tell you, you don’t have to be that idiot.
In the box and construction: in my picture you can see the tool, a free little tool that is horrifically sharp, a screw driver, and 3 replacement punch plates. The punch tool feels extremely sturdy and feels well put together. It also has a clip to hold the handles together for storage. (Also you have to offset the punch from the plate to close the handles. May seem obvious to some but thought to mention it.)
Use: I have tiny girl hands. For reference, I struggle to open Talenti gelato containers. But this tool? It made punching holes in leather an absolute breeze! I was pretty amazed. You don’t have to push very hard and you can tell when you’ve made it through the leather. I pushed a little too hard and made a dent in the punch plate but it was entirely avoidable but a testament to how easy this thing is to use.
Overall thoughts: for $20 this thing is a steal. I made a total of 14 holes and the last one felt as easy as the first. This thing could break in a month and I feel like I’ve gotten $20+ out of this because taking my real leather belt to a professional would’ve cost me so much more.
Does it do what as advertised? Hell yeah and way better than what I would’ve imagined. 5 stars
In the box and construction: in my picture you can see the tool, a free little tool that is horrifically sharp, a screw driver, and 3 replacement punch plates. The punch tool feels extremely sturdy and feels well put together. It also has a clip to hold the handles together for storage. (Also you have to offset the punch from the plate to close the handles. May seem obvious to some but thought to mention it.)
Use: I have tiny girl hands. For reference, I struggle to open Talenti gelato containers. But this tool? It made punching holes in leather an absolute breeze! I was pretty amazed. You don’t have to push very hard and you can tell when you’ve made it through the leather. I pushed a little too hard and made a dent in the punch plate but it was entirely avoidable but a testament to how easy this thing is to use.
Overall thoughts: for $20 this thing is a steal. I made a total of 14 holes and the last one felt as easy as the first. This thing could break in a month and I feel like I’ve gotten $20+ out of this because taking my real leather belt to a professional would’ve cost me so much more.
Does it do what as advertised? Hell yeah and way better than what I would’ve imagined. 5 stars
Images in this review
Top reviews from other countries
María G
Es una herramienta para manualidad
Reviewed in Mexico on December 7, 2023Size: 1 PackVerified Purchase
Dr. O'Neill
Excellent little punch
Reviewed in the United Kingdom on September 22, 2020Size: 1 PackVerified Purchase
Stefan Schmidt
Hält was sie verspricht
Reviewed in Germany on April 6, 2020Size: 1 PackVerified Purchase
